Sign In
Apply for Membership
About
Events
Archive
Contact
Map
Pictures
Forums
For Sale
We had a different approach to this problem on Dragonslayer. As the lining is fitted to plywood panels on our 12 metre we carefully removed the vinyl from the ply and completely removed all of the foam from both surfaces. It was imperative that all debris was cleaned from the mating surfaces. A liberal application of uv wood glue was applied to both surfaces and the vinyl re-applied taking care to stretch the covering and temporarily holding it into place with a paper staple gun on the rear side of the panel. When the glue dried out the covering pulled tight and gave a very smooth finish. Great care has to be taken to make sure nothing gets between the surfaces. We managed to leave a bristle from the glue brush on the surface of one of the panels and increadably it shows through. The lower panels surrounding the windows were covered in a cheap burber carpet.
Cancel
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Sign In
Register